Having the right adhesive on hand can make many small household chores a breeze. Hot glue comes
in handy anytime you have an accidental breakage, need a quick appliance touch up or when it’s time
to address general wear and tear.
Here are 10 exciting ways hot glue adhesive is useful around the house for quick fixes and repairs.
No matter what type of project you have in mind, always quality hot glue gun for proper application
1. Quiet that noisy drawer when it shuts
Fix cabinets and drawers that make a loud bang when closed with a bead of hot glue. The glue will
dampen the sound on contact, eliminating the irritating noise. To avoid damage to the item, you can
apply painter’s tape or adhesive tape to the inside of the drawer or cabinet before applying the glue.
Open the offending drawer or door and find the contact points that make the noise when slammed
together. Add tape if necessary to protect the area, and then a dollop of hot glue about the size of a
small pea. Form it, if necessary, and then let it cool. These small beads will diminish the points of
contact and inhibit the banging noise.
2. Stabilize small appliances
Items like computers, table legs, bookends and trivets have small rubber feet to keep them stable on
a slick surface. Over time, these can wear away or get lost, leaving the item wobbly, unstable or
crooked. Repair this quickly with a small bead of hot glue. To avoid damage, you can apply painter’s
tape or adhesive tape to the item before applying the glue. Bead a good amount of hot glue on the
surface and make sure the replacement bead is the same size and shape as the existing rubber feet.
These small beads will stabilize your item for easier use on a flat surface.
3. Repair an exposed area of wire insulation
Electrical cords can suffer insulation damage over time, leaving the wires inside the cord exposed.
Repair this by applying hot glue on top of the exposed area.Unplug the cord from the electrical outlet
before attempting to fix it. If the damage is extreme, indicated by the metal part of the wire being
exposed, call a professional or replace the item. Apply a length of hot glue over the exposed area,
replacing the insulation and sealing off the wire correctly. Apply in layers, if necessary, and mold into
shape, ensuring everything is adequately covered and protected.
4. Fix an unraveling hem on pants
Unstitched or torn hems seem to appear at the wrong time and are never a quick fix. It requires either
a change of clothing or digging out the needle and thread. Apply hot melt adhesive in dabs around the
broken hem and glue it firmly back into place. The cloth won’t absorb the glue, and the fix will be
completely invisible. It will stay in place even after a few washes You can leave the fix in
semi-permanently. When you are ready, gently remove the adhesive and stitch the hem.
5. Tighten a loose handle on a hand tool
Handles often loosen over time, rendering hand tools useless. However, objects like screwdrivers,
trowels and shears can be given a second life with a bit of adhesive. Add a few drops of adhesive to
the handle to reattach. Allow the glue to cure properly, then give it a test before you use it on a project.
If you inadvertently stripped a screw hole before you fixed your hand tool, you can easily fix it. Fill the
stripped hole with hot melt glue, let it dry completely and drill a pilot hole before sinking your screw.
6. Repair your soap dish
This fix works with those irritating plastic soap dishes that collect water and leave your soap soggy.
Use a gentle drill bit to make three or four small holes in the center and underside of the dish. These
will form drain holes, allowing water to escape easily. Next, clear them of any sharp edges. Turn the
dish over and add a series of hot glue dollops at the corners and in the center, being sure not to cover
any of the drainage holes. Pat the glue down, so it is of equal height, allowing your soap dish to be
level and slightly raised above the surface. There’ll be no more soggy soap with this fix because water
simply drains away, leaving your soap dry.
7. Keep area rugs from migrating
Small area rugs, like those you use in front of doors, are constantly on the move. Instantly add grip to
the back of rugs and slow down the constant migration across the floor. If necessary, apply painter’s
tape or adhesive tape to the back of the rug before applying the glue to avoid damage. Drizzle a
pattern or apply small beads over the back side of the large surface. Let the glue cool and cure before
turning over. The glue dots will provide enough grip to keep the area rug from slipping.
8. Clean Your Make Up Brushes
On a small plastic surface, like a clipboard, make a series of dots and waves with hot glue. Cover the
entire surface with these patterns and allow it to dry. Hold the finished result under running water.
Using a gentle soap, rub your used make up brushes against it to clean them. This works like the
old-fashioned washboards and is a wonderful solution for makeup brush cleaning.
9. Repair exposed underwire in your bra
If your bra underwire is protruding and causing discomfort, you can fix it with some hot glue. Simply
push the exposed piece of underwire back into its material sheath and add a measure of hot glue to
keep it there. While the glue is wet, cover it with a small patch of cloth for reinforcement and to add a
layer of protection between the repaired area and your skin.
10. Hang Christmas lights easily
Christmas lights attach easily to the outside of your brick or stucco home with hot glue. Don’t try this
on painted surfaces, as it may remove the paint. Find a midpoint or begin at the plug end of a strand of
lights. Apply glue to the light socket, then gently press against the house to adhere. Install a few sockets
at a time and wait for a proper bond before proceeding. When it’s time to take them down, the lights
come off easily. Simply slide a putty knife between the light socket and the surface. If any residue
remains on the house, it will disintegrate during warm weather and with exposure to the sun.
What Can’t Hot Glue Do?
Hot glue has so many applications around the house that can save you time and money. As you go
through your to-do list, see how many ways you can use hot glue to help you repair small appliances,
make your DIY projects easier and even keep your rugs, pictures and appliances from wobbling. With
the right application, hot glue can restore balance, serenity and order to your home.